|Title||What are the 115*1*22 cutting disc things to watch out for?|
|Description||Because of its high efficiency, convenience, economy and other unique properties, the cutting piece has been widely used in many industries, but many people do not have a clear understanding of the specific performance of the cutting piece and the use of different cutting pieces. Today, cutting piece manufacturers Aurora Abrasives Co., Ltd. based on years of experience to share with you the correct selection and use of115*1*22 cutting disc : Cutting blades can be divided into cutting and grinding. Most of the cutting machines are fixed mobile. The power of the machine is divided into high power (>5.5KW) and low power (<3KW). The cutting speed also has high speed. Cutting (>80m / s) and ordinary cutting. In addition, cutting materials are varied, such as stainless steel, titanium alloy, ordinary steel, viscous metal, high carbon steel, non-metal, etc. The requirements are different, so it is important to choose a reasonable cutting piece. Ordinary cutting machines usually refer to fixed cutting machines, cutting machines with power <3KW and rotation speed of 2900 rpm. Ordinary cutting machines usually cut workpieces with a diameter less than 50mm. However, due to the small cutting power in order to reduce the radial frictional resistance, this When we usually choose a cutting piece with a thickness of 3.2mm, the cutting piece is thinner and has a certain elasticity, and it will feel sharper when cutting. The product of Aurora Abrasives will change the surface contact into points in order to reduce the lateral frictional resistance. Contact, and the formulation system adds lubricant, which can greatly reduce the frictional heat generated during cutting and improve the durability and sharpness of the cutting blade.|
Please register or log in.