Please register or log in.
Item details add to favorites
Category Cars
No Picture
Created 2018-12-06
Owner xuanxuan251
Title How to make a choice for limestone sand making machine facing blocking problem?
Description When the sand making machine is inadvertently, it will encounter the problem of blocking the material, which will cause the production capacity to drop. If you want to solve this problem, you should find the reason. The letter is summarized as follows. Let's take a look! 1. The discharge port is improperly adjusted. In the production process of the crusher, if the speed of discharging the material is too slow, the material that is subsequently crushed will be accumulated in the discharge port and the crushing chamber, causing obstacles in discharging. 2, the material has a large water content If the moisture of the material is too much, it may stick to the sand making machine. An effective solution is to pre-heat and other treatment at the inlet. 3, the feed rate is too fast The feeding speed and the processing speed are not well matched, the feeding is fast, the crushing is slow, the discharging is not enough, and the equipment is prone to overload work, which may cause the phenomenon of blockage, so it is necessary to ensure the feeding of the sand making machine. The uniformity and continuity of the feed reduce the problem of blockage of the equipment. 4. The tightness of the V-belt is not appropriate. The production process of the sand making machine is to transfer the power to the sheave by the V-belt, and then crush the stone. When the triangular belt is loose, it will cause slippage, and the sheave will not be driven as the sheave rotates. The material cannot be subjected to normal crushing force and cannot be pulverized in the crushing chamber, and then the material blocking phenomenon occurs. 5, improper manual operation This is one of the more common reasons for sand blockers. The operator of the sand making machine must go through the training of the system and understand the equipment before it can be put on the job. Otherwise, it will not only cause the production capacity of the equipment to be low, but also cause damage to the equipment over time. The above points are the countermeasures for the limestone sand making machine facing the problem of blocking materials, and I hope to help our users.
Consumption  
Broken No
Price  
Promotion level None