Home » Cars » Economy cars » What is the reason why the sand making machine appears to sway during use?
|Title||What is the reason why the sand making machine appears to sway during use?|
|Description||The new sand making machine is 50% more energy efficient than traditional sand making machines. It can make all kinds of rocks, sandstones and river pebbles with construction sand of various grain sizes. The sand has uniformity of plasmid and high compressive strength, which is far more consistent with the sand produced by natural sand and ordinary hammer sander. Requirements can improve the quality of the building. The equipment has the characteristics of reliable performance, reasonable design, convenient operation and high work efficiency. It is also very normal for the sand making machine to encounter problems during work. Just like people are sick, it can solve this problem as long as the right medicine is available. Today we are going to discuss how to solve the problem that the sand making machine will violently swing during work, then there are three possible reasons: (1) The sand making machine may also have obstructions in the impeller flow passage. If there is obstruction in the impeller flow passage, the feeding will be uneven, and the body swings too much. The body can be solved by removing the obstruction on the impeller flow passage. The problem of swinging too big. (2) It may be that the equipment is too large to cause excessive swinging of the material. When the sand making machine is designed, the feeding size of the equipment is generally 4 to 5 cm. Generally, the feeding size of the equipment is 3 to 4 cm. At the time, the amount of finished sand can be increased. If the feed is too large, the equipment will swing too much. If the feed is too small, the collision is not enough and it is difficult to reach the finished sand. (3) It may be that the wearing parts on the impeller of the sand making machine are worn more seriously. If the wearing parts of the impeller are seriously worn, the internal operation of the sand making machine will be unstable, resulting in excessive swing. At this time, as long as the wearing parts are replaced, the internal impeller of the sand making machine can be balanced.|