|Title||Raymond Mill (Raymond Mill) host working principle|
|About me||The Raymond Mill is driven by the drive shaft, and the upper end of the central shaft is connected with a main part. The plum rack is equipped with a roller device to form an active fulcrum. It not only revolves around the central axis , While the roller itself due to friction and rotation. The lower part of the plum is equipped with a blade device, and its position is exactly the same as that of the roller device. Each blade rotates the material fed into the main engine between the roller and the grinding ring during the rotation process to form a gasket layer, Due to the rotation of the roller produced by the centrifugal force, the material crushed by the resulting. The blades of the analysis machine are equipped with 60 blades, which are rotated by the secondary speed and driven by the main shaft. As the electromagnetic speed motor speed can be adjusted, so the speed of the blade turntable can also be adjusted accordingly. If you want to get a very fine finished product size, it is necessary to improve the rotation speed of the blade, so that the contact rate of leaves and powder increased, more undesirable powder, leaves the shell to the shell wall, lost centrifugal force, ultrafine mill grinding machine. The specifications of the powder from the air out, through the powder into the large cyclone separator, the separation of gas and powder.|
|Searching for a||Man|
|About the partner|
Please register or log in.