|Title||Ultrafine mill processing materials which advantages|
|Description||Ultrafine mill, also known as ultra-fine milling machine, can be said that the derivative of the mill products, because it is based on the transformation of the mill to complete the transformation of the processing of the majority of materials, processing of the majority of materials, Used to process barite, limestone, calcite, marble and other ore materials, only from the appearance of the two is basically no difference, can be distinguished from the appearance of Ultrafine mill of the host and the analysis and the use of high pressure Spring, the use of soft connections to reduce the way the Ultrafine mill machine vibration. Since the Ultrafine mill machine than the Ultrafine mill will be more advanced, then the Ultrafine mill processing materials have what advantage? Ultrafine mill and ultra-fine milling machine are mine milling machine, in appearance, the role of similar circumstances, often confused, but after all, Ultrafine mill is based on the Ultrafine mill made improvements, Performance naturally have its unique place, what are the advantages of ultra-fine milling machine. First, the fineness of the finished product and the feed size, the Ultrafine mill mill is relatively fine, the sieving rate is higher. Ultra-fine Raymond grinding material size is basically maintained at between 100-325 mesh, and Ultrafine mill of the material size is between 40-425 mesh, and the grinding of the material particle size finer, fine Up to 3000 mesh. The smaller the Ultrafine mill of the original feed to stabilize the output, the higher the efficiency of processing, and high-pressure roller mill feed grain size than the scope of Raymond grinding more. Followed by the output, compared to Raymond Mill, ultra-fine milling machine within the host grinding chamber of the upper part of the design of the 1500kg-2000kg pressure device, the same power, the output increased by 20-35% Raymond Mill is higher. Once again, wearing parts, Ultrafine mill machine relative to save the wearing parts. Ultrafine mill with the advantages of high-pressure device In addition to the increase in production can also make full use of grinding roller grinding ring, conventional conditions to reach the critical point before grinding, you can use to adjust the high pressure device, the roller and grinding ring close pressure, Limit the use of the limit. And ultra-fine Raymond grinding is not enough, in the long-term use of the process, the grinding roller and grinding ring loss of time, even if the adjustment of bolts and other parts, can not make it close grinding, out of finished powder on the requirements of fineness, This time only replace the vulnerable parts. After the processing of materials on the range of Ultrafine mill than the ultra-fine Raymond grinding material applicability, can be processed Mohs hardness of 9.3 below the various materials, breaking the limitations of Raymond Mill, expanding the processing of grinding Material is ideal for processing materials such as quartz, feldspar, talc, marble, calcite, limestone, granite, dolomite, bauxite, iron ore, barite, bentonite, coal gangue, coal and other materials.|
Please register or log in.