Please register or log in.
  • (67 pages)
  • first
  • prev
  • 2
  • 3
  • 4
  • 5
  • 6
  • next
  • last
Advertisements in this category Notify me when new ads are submitted in this category
  Title ascendingdescending Type ascendingdescending Price ascendingdescending Picture
add to favorites Preparation of diamond abrasive Pc  

According to the thermal stability of the diamond abrasive, the firing temperature of the grinding wheel and the refractoriness range of the bonding agent were determined. The reaction of several oxides at the firing temperature of the hot sale cutting wheel and the diamond abrasive was analyzed by using the free energy generation principle of the oxide. The chemical composition of the binder was determined. According to the glass structure theory, the content of each component in the binder was determined, the binder formulation was determined, and it was used in industrial production.

3. The preparation process of the binder. Our company used smelting method to prepare ceramic binder, determined the process of binder preparation, discussed the influence of different heating curves on the properties of smelting binders, and found that only the crystallization water and easily decomposable materials in the binder raw materials were at their decomposition temperature. After the decomposition is completed, it is raised to the smelting temperature, and the obtained binder is stable in performance; the performance test of the binder is carried out, and the holding strength of the diamond abrasive grains is large, and it is suitable for manufacturing a ceramic bond diamond grinding wheel for grinding diamond composite sheets.

4. The grinding of the diamond composite sheet was carried out. It was found that the grinding of the composite sheet mainly removes the excess diamond on the outer circumference of the composite sheet. Since the diamond is very hard, when grinding with a resin bond grinding wheel, the grinding wheel is ensured by the resin bond diamond grinding wheel. Durability, generally done very dense, basically no air holes, so the grinding force is particularly large during grinding, the damage to the spindle of the grinding machine is very large; and the grinding wheel is not sharp, the grinding wheel will make the knife when the knife is large, and it will be issued Squeaking; grinding efficiency is very low. Because the ceramic bond diamond grinding wheel has pores, the self-sharpness of the grinding wheel is very good, and the damage to the spindle of the grinding machine is small; the grinding wheel is sharp and the grinding efficiency is high; when the grinding is not performed, the size of the composite piece is good. In addition, when the composite sheet is ground, the temperature in the grinding zone is high, and the resin is not resistant to high temperature, so the resin will become soft in the grinding zone, the holding strength of the diamond abrasive is lowered, and the grinding wheel is consumed quickly; the ceramic binder does not have this problem. The grinding wheel has little noise during grinding and almost no grinding sound is heard. The advantage of the ceramic bond diamond grinding wheel for grinding the diamond composite sheet is that the grinding efficiency is high, the size of the ground composite sheet is good, the grinding noise is low, and the damage to the spindle of the grinding machine is small.

add to favorites Cold pressing process in the production process of cutting sheets Pc  
No Picture

Most of the grinding wheel production is ceramic grinding wheel. The ceramic bond grinding wheel has the advantages of natural porosity and chemical stability, so it is suitable for dry grinding and wet grinding, especially under the conditions of water-based and oil-based grinding fluid. However, ceramic grinding wheels are less elastic and require a high sintering temperature. In contrast, the phenolic resin bond grinding wheel has the advantages of good elasticity and low sensitivity to shock, impact, and side pressure. Its high stability makes it suitable for higher speeds and Produce high performance cutting disc. Its good elasticity makes it suitable for ultra-precise grinding and surface polishing, making it particularly suitable for grinding wheels.Also one of the hot sale cutting wheel

The production process of the phenolic resin bond grinding wheel is mainly a cold pressing process, and the bonding agent used in the cold pressing process is a wetting agent and a powdery resin, and a liquid phenolic resin, furfural, decyl alcohol, cresol, etc., which are generally used as a wetting agent, Mostly used are liquid phenolic resins. The factors determining the ratio of liquid resin to powdered resin (usually called liquid to powder ratio) are: abrasive particle size distribution, filler type, filler amount, viscosity of liquid resin, and properties of powdered resin. If the viscosity of the liquid resin is large, more liquid resin is required to completely cover the surface of the abrasive; the smaller the particle size of the abrasive and the filler, the larger the specific surface area and the more the liquid is used; the higher the molecular weight of the powdered resin The lower the free phenol, the worse the adhesion to the liquid resin and the greater the amount of liquid required. In all of the above cases, it is necessary to increase the liquid to powder ratio. Generally, a liquid resin is used as a wetting agent, and the ratio of liquid to powder is 1:2 - 1:4, and a mixture of furfural or decyl alcohol and eucalyptus oil is used as a wetting agent, and the ratio of liquid to liquid is 1:6 - 1:8. It is better to achieve the desired mixing effect without damaging the abrasive. The mixing time after adding the fine powder is generally 2-4 minutes. If the mixing is too short, the mixing is not uniform, the resin film is too long to fall off, and the temperature of the material is increased.

add to favorites Unique traits of mobile crusher and cone crusher Pc  
No Picture

Our company has been engaged in the research, development and manufacture of whole set of portable crusher plant for many years and knows every well their secret. So no matter you are a veteran player or a new comer in the mining machinery industry, we suggest you read this article and we can guarantee you will learn more and profound than reading product instruction.

The important features of mobile stone crusher are big crushing ratio and good particle shape which are because it applies the technology of stone mobileing stone, so that materials will be crushed repeatedly, thus reducing the abrasion of the machine as much as possible. However, such working principle also determines the limit of mobile crushing machine: it has no advantage in hard ore crushing.

By contrast, cone crusher is a crushing machine more suitable for crushing hard ores. Speaking from working principle, China cone crusher crushes and release stone materials making use of the change of the gap between the two cones installed head to head. Of course, to do such a job, sufficient safety measure must be taken to avoid damaging efficient spare part. Such insurance device generally has mechanical spring device and hydraulic spring device. At present, hydraulic cone crusher is developing rapidly and has become the main force in the mining machinery market. We also mainly manufactures sand making machine which can be divided into two types: principal axis stationary type and principal axis mobile type according to the adjustment method of discharging mouth and the installation method of principal axis. The adjustment of discharging mouth of principal stationary type hydraulic cone crusher is carried out through the spiral gyration of fixed cone to make the rolling mortar wall of fixed cone to move up and down, and its principal axis is short and thick and is fixable inserted onto the machine frame and its bearing ability is strong. The working principle of the insurance device goes like this: in the crushing process, the crushing force is pulsatile, when there are non-crushable materials, the insurance device will increase the crushing gap to make the hard materials to go through and the hard materials will be separated by the follow-up ore beneficiation equipment.

add to favorites Market recognition of product quality Pc  
No Picture

The standard is not the bondage but the standard, which is the guarantee of quality. The Aurora Abrasives Enterprise carefully obeys the production work of the grinding wheel and the cutting piece, and produces a batch of standard cut off wheel for metal that meets the industry standards and quality assurance.hot sale 9" cutting off wheelThe reason why it is welcomed is the market recognition of product quality.

China is an important part of the world. China's different industries are very active in the world. They show China's contribution to the world. China's abrasives industry has obvious advantages in terms of product cost performance. With the rapid growth of market demand, diamond tool companies all over the world have launched, and a number of advantageous enterprises with international competitiveness have emerged. China has become an important diamond tool producer, user and exporter in the world, and it is expected that the application of diamond tools in emerging industries will be further expanded.

add to favorites 2018 International Abrasives Grinding Exhibition Pc  

2018 China (Guangzhou) International Abrasives Grinding Exhibition opened in Guangzhou Pazhou International Convention and Exhibition Center. 2018 China (Guangzhou) International Abrasives Grinding Exhibition is themed on abrasives, abrasives, superhard materials and grinding products, covering the latest technology and products in the abrasive grinding industry. It is specialized in providing grinding solutions. The first professional grinding technology exhibition in the region. Guangzhou Sanmao Exhibition will gather the largest and largest mainstream abrasives and abrasives enterprises in Guangdong Province and its surrounding areas, fill the gap of the three-grinding industry in South China, open up the technical and information exchange barrier, and focus on the market of abrasives and abrasives. The industry provides a quality platform for user needs, technical support, and product circulation.

The exhibits of this year's exhibits are divided into several categories, including abrasive abrasives and raw and auxiliary materials, abrasive abrasive manufacturing and testing equipment, grinding processing related equipment and tools, including but not limited to:

Superhard materials and products - synthetic diamond, cubic boron nitride and its micro-powder, PCD, PCBN, CVD diamond film and thick film / super hard material grinding, cutting, drilling, polishing and other tools.

Ordinary abrasives and products - corundum, silicon carbide (boron) and other ordinary abrasive / ordinary fixed abrasive / refractory materials. Coated abrasives - abrasive cloth, sandpaper and various shaped coated products. Raw and auxiliary materials - raw materials, 7'' cut off disc for metalmolds, various bonding agents, metal powders, binders, substrates, etc. for the manufacture of superhard materials and ordinary abrasives. Grinding related equipment and tools - grinding machines, grinding centers, electrical processing equipment, grinding machines, polishing machines, honing machines, lapping machines, grinding robots and various accessories and related auxiliary materials and products; metal forming machine tools , metal cutting and welding equipment, CNC systems and functional components, industrial automation, machine tool accessories and components; various tools, tools, measuring tools, etc.

Special equipment for the manufacture and testing of abrasives - synthetic diamond press, shape selection machine, screening machine, magnetic separator, shaker, mixing machine, forming machine, hot press, cold press, sintering furnace, welding machine, Laser cutting machine, corundum and silicon carbide smelting furnace, crushing and milling machine, firing and hard (sulfur) equipment, grinding wheel processing equipment, abrasive cloth manufacturing equipment and various abrasive tools testing equipment.

The International Abrasives Grinding Exhibition aims to create an integrated platform for abrasive grinding technology and equipment in South China, providing a reliable one-stop solution for the industry.

add to favorites Курсы SSAT, ISEE, SAT, ACT преподаватель, репетитор из США Pc  
Преподаватель американского университета, репетитор английского языка, проводит индивидуальные курсы подготовки к тестам / экзаменам SSAT, ISEE, SAT, ACT в Москве 8-926-206-3689. Ваша задача - деловой английский? Через короткое время вы сможете выучить английский язык до уровня свободного ведения переговоров. Нужен бизнес английский язык для работы с деловыми партнерами? Необходимы курсы подготовки к тесту GED или MAT (Miller Analogies Test) ? Поступаете в американскую частную школу и хотите подготовиться к тестам SSAT, ISEE, GED? Поступаете в американский университет и хотите подготовиться к тестам TOEFL, SAT, ACT? Преподаватель из США решит вашу проблему. Ваш репетитор проводит обучение с прицелом на надежный и быстрый результат 8-926-206-3689. Английский разговорный, деловой английский язык, американский английский, языковые курсы, тест SSAT, ISEE, SAT, ACT - все уровни и направления в изучении английского языка вам доступны. Ваш преподаватель / репетитор решит задачу с минимальными затратами времени и средств 8-926-206-3689.
add to favorites The status quo of Chinese abrasives in the world Pc  
No Picture

The world's superhard material tools are produced all over the world. Among them, 12 inches cut off wheel tools are manufactured in Japan, Germany, the United States and South Korea. These countries are rapidly turning tools for superhard materials. Other abrasives have been used. It is decreasing year by year. Because of its high efficiency, energy saving, long life and environmental friendliness, super-hard materials have ten times higher efficiency and life than traditional tools.

 China's superhard materials industry began in the 1970s. Prior to this, almost all of the super-hard material tools such as diamond saw blades were imported. In the 1980s, a large number of production enterprises mainly producing small-diameter diamond saw blades were launched, and the high-speed development period began in the 1990s. The super-hard material tool industry has realized a complete industrial system with complete scale and considerable scale, from the end to the present, including the supporting raw material supply system, equipment supply system, auxiliary material system and market system. Produce tools for superhard materials that basically meet the needs of the development of various industries. There are still a large number of products exported every year, especially in the middle and low-end products, but at the high-end product manufacturing and technical level, compared with the advanced level of foreign countries. There is a certain gap.  

 With the continuous advancement of science and technology, the unique properties of super-hard materials have been continuously developed and utilized. The technical level of super-hard materials has been continuously improved, and the application fields have been continuously expanded. The super-hard material products industry has become an indispensable important part of national economy and national defense construction. component. With the maturity of synthetic diamond technology and the rapid development of China's economy, diamond tool manufacturing technology has accumulated and progressed, and has strong manufacturing capabilities.

Due to the advantages of enterprises in labor costs and the subsequent catch-up situation in technology research and development, Chinese enterprises have obvious advantages in product cost performance. With the rapid growth of market demand, diamond tool companies all over the world have launched, and a number of advantageous enterprises with international competitive strength have emerged. China has become an important producer, user and exporter of diamond tools in the world, with an annual output value exceeding 10 billion yuan. The application of diamond tools in emerging industries is expected to expand further with the increasing grade of synthetic diamonds. Its excellent performance is expected to be widely used in high-tech fields, such as machining of precision instruments such as aerospace instrument bearings, radar waveguides, optical devices, high-energy smokers, etc.; can be used for single crystal silicon, polycrystalline silicon 0.1-0.2mm High-precision precision machining such as cutting, grinding, and satellite solar panels for thickness sheets; it can be used for micro-precision cutting, slotting, back-thinning, and nano-diamond polishing of large-scale integrated circuits such as computer chips. The developed countries in the world all regard superhard materials and products including synthetic diamonds as the development focus. The research and application level of superhard materials and their products represent the level of scientific and technological development of a country to some extent.

add to favorites The properties of rocks have effects on quarry crusher Pc  
No Picture

We should know the nature of rocks before using the quarry crusher. Only understand the properties, can we choose suitable quarry crusher, and avoid using unsuitable crushers.Structure, density, humidity, hardness, strength, flexibility, plasticity, brittle, heterogeneity, anisotropy, porosity, ruggedness, drill-ability, etc, everyone is closely related with the crushing effect.

Rock crushing method, in specifically, is the method to drill various sizes and shades of holes in different performance rock stratum by a variety of mining machines. According to the crushing principle, it can be pided into impact, cutting and impact-cutting three categories. Each category has its own application range. They all have unique features and the same crushing theory. The drill which directly crushes the rock requires reasonable structure and size, as well as suitable pressure, rotate speed and torque. The drill bit must be match with the nature of rocks.

The sand making machine is suitable for crushing rocks such as granite, basalt, river gravel, limestone, andesite, rhyolitic rocks, diorite, diabase, sandstone, etc., which can widely applied to crush mid hardness and large-scale rocks and ores in mining, smelting, building material, highway, railway, water conservancy chemical and other industries. It is suitable for primary and secondary crushing for all and rocks with compressive strength less than 320 MPa.

add to favorites Abrasive companies keep pace with the times Pc  
No Picture

Adapting to the trend is to keep pace with the times, the needs of abrasives companies are constantly changing, China supply 7" Cut off disc The market update is also promoting the pattern of abrasive companies. Small abrasives companies must have industry vision, follow national policy trends, and explore new ways to explore the future of the company.

1, adjust the residual structure, streamline the processing mode to suppress excess capacity.

Achieving the ability to create manufacturing capabilities when manufacturing standard cutting discs, producing standards with innovative Cut off disc for stainless steel products, to achieve this goal, the first thing to have a business development strategy. We all know that whether it is industry development or enterprise progress, we must formulate strategic development plans. This is the goal of advancement to prevent blind and more mad development. After all, the production of low-end abrasives is in a state of overcapacity. Only by completing the tasks of structural adjustment and transformation of development methods, strive to develop healthily and rapidly. Through the whole industry, we will cultivate a group of large and powerful enterprises and a small number of small and specialized small giant enterprises to enhance the core competitiveness of the industry.

2. Enhance the intensity of independent innovation and research input.

And actively explore joint research on production, learning, research, and new methods. Through the development of the brain, we can introduce technology and talents, and actively develop high-end products. The focus of grinding is on deep processing product development. To meet the rapid growth of the photovoltaic industry and engineering ceramics and refractory market demand.

3. Promote green manufacturing.

Green manufacturing refers to modern manufacturing models that consider environmental impact and resource efficiency while ensuring product functionality, quality and cost. It is the development trend of the mechanical manufacturing industry in the 21st century. It is an application that realizes energy conservation and recycling of resources, minimizes the impact on the environment, and establishes an important way of resource conservation and environmental friendliness.

Green manufacturing includes energy conservation and emission reduction. This work is a more prominent problem in the abrasives industry. Although the abrasives industry has not yet been included in the “two highs and one capital” industry, the National Development and Reform Commission's abrasive grinding industry includes the survival of enterprises. At the bottom line, our business is to learn new technologies, such as energy conservation and emission reduction, new technologies, the development of circular economy, and the full implementation of green manufacturing.

add to favorites Grinding wheel particle size selection Pc  

The particle size of the grinding wheel is to crush, roll and process the smelted crystal block, and then screen the fine powder of different sizes of particles, wherein the particle size is represented by a number, which is called particle size. The particle size is generally expressed by the number of the sieve, that is, the sieve hole per inch length, and the larger the number, the smaller the abrasive grain.

thin flat cutting discGranular choice

The wheel size is a measure of the size of the abrasive particles. The choice of grinding wheel size directly affects the surface roughness and grinding efficiency of the workpiece. In general, the grinding efficiency is high when grinding with a coarse-grained grinding wheel, but the surface roughness of the workpiece is poor. When grinding with a fine-grained grinding wheel, the surface roughness of the workpiece is good, but the grinding efficiency is low. In short, under the premise of meeting the surface roughness requirements of the workpiece, the abrasive tools with coarser grain size should be selected as much as possible to ensure high grinding efficiency.

Usually the choice of grinding wheel size is determined according to the grinding needs. usually:

Rough grinding: steel ingots, forged castings, leather wood, cut steel billets, etc., for 12#. 30#

Semi-finishing: used for rough grinding of plane, outer circle, inner circle, centerless grinding, etc., applicable to 36#

General fine grinding: used for outer circle, inner circle, plane, centerless, tool grinding machine and various special grinding machines, etc., applicable to 60#

For fine grinding, honing, threading, etc., for 120# one W20

Super fine grinding: fine grinding, super fine grinding, mirror grinding, etc., for W20

add to favorites Resin diamond grinding disc use ten must note Pc  
The work of the resin diamond high quality metal grinding disc is mainly to grind. The grinding disc is also divided into many different types according to different classification methods. The resin grinding disc is one of them. The resin grinding disc is a grinding disc processed by a bonding agent. To introduce the problems to be paid attention to during use, let's take a look at it! 1. Before using the resin grinding disc, be sure to check the product for cracks, products and dumb sounds. If it is, it cannot be used. 2. The speed of the resin diamond grinding disc shall not exceed the specified safe working line speed. 3. Do not use the end face high quality metal grinding disc exclusively. Please do not work with the end face of the grinding disc. 4. When the resin diamond grinding disc is working on the workpiece, please do not push the workpiece with the lever to increase the pressure on the grinding disc. 5. Special dressing tools should be used for dressing the high quality metal grinding disc. Operators must wear protective goggles when trimming.
add to favorites Vibratory mill is a special grinding mill Pc  
No Picture

A vibratory mill having a long, thin milling chamber which spirals upward in a conical arrangement from a center location within a housing to a point at the periphery of the housing. The configuration of the chamber improves the efficiency of the mill and promotes the use of a continuous operation rather than a batch process. Eccentrically mounted rotating weights cause the media and parts to migrate upward from a central receiving position to the periphery of the housing.

This is the first mill we will consider which does not rely on rotation for the main grinding action. The vibrating mill is a grinding mill which is filled to about 65 80% of its capacity with grinding media such as balls or rods. The chamber is vibrated at a frequency of between 1000 and 1500 times per minute (can be variable speed) by cams or imbalanced weights.The grinding action is efficient and thorough. Grinding media material and chamber lining can vary depending on application.

Vibrating mill can grind hard or soft materials. Maximum throughput is in the order of 20 t.p.h. but feed size should be kept fairly small. Although final product size can be as low as 0.005mm this type of mill is often used for less fine applications. Product size and shape is a function of the time spent in the mill, media type and size, and frequency of vibration. Commonly functions as a batch mill.Material suitability for vibratory mill: Lime, Calcium carbide, Alumina, Gypsum, Bauxite, Chromitem, Limestone, Sillimanite, Fluorite, Pigments, Dolomite, Magnesite.

Vibratory mills are the most versatile line of mills available today for fast, low-cost particle size reduction to sub-micron range. The raymond mill action achieves higher output per input horsepower; precise control of size and distribution. Product contamination from media and lining wear is virtually eliminated. Maintenance costs are low because of few moving parts and replaceable linings made of abrasion-resistant metal, ceramic or elastomers.

The Vibratory Mill's unique vibratory motion, coupled with the use of cylindrical media, allows a dense packing of the media bed assuring maximum media surface contact and minimum void area when operated under a low energy condition. Feed materials as large as 300 microns can be reduced to sub-micron sizes.In the high energy configuration, feed materials as large as twelve inch agglomerates have been successfully milled and solid particles of a half inch are being reduced to a d50 of less than 5 microns low energy condition is reserved for wet milling whereas the higher energy mode can be used either wet or dry.

add to favorites Stainless steel grinding program Pc  
No Picture

Stainless steel is a type of metal that has a degree of corrosion resistance in the atmosphere or in certain corrosive media. Because of these advantages, it is widely used in different industries of the current society. Stainless steel grinding burns have been plagued by grinding. Briefly introduced the classification of stainless steel and the characteristics of stainless steel grinding, stainless steel grinding burns and solutions.

One: 7" cut off disc for stainless steel classification:

Martensitic stainless steel (common grades are 1Cr13, 2Cr13, 8Cr13, 1Cr17Ni2, etc.)

Ferritic stainless steel (common grades are 0Cr13, 1Cr14S, 1Cr17, 1Cr17Ti, etc.)

Austenitic stainless steel (common grades are 1Cr18Ni9Ti, 0Cr18Ni9, 1Cr18Ni9, etc.)

Precipitation hardening type stainless steel (common grades are 0Cr17NiCu4Nb, 0Cu17Ni7Al, 0Cr15Ni7Mo2Al, etc.)

It can be classified into a Cr system (SUS400), a Cr-Ni system (SUS300), a Cr-Mn-Ni (SUS200), and a curing system (SUS600).

Two. Features of grinding stainless steel:

1. Stainless steel has high toughness and high heat strength, while the cutting edge of the grinding wheel has a large negative rake angle. During the grinding process, the grinding debris is not easily cut, the cutting resistance is large, and the extrusion and friction are severe. The grinding force per unit area is very large, and the grinding temperature can reach 1000 ° C ~ 1500 ° C. At the same time, under the action of high temperature and high pressure, the grinding debris is easy to adhere to the grinding wheel, filling the gap of the abrasive particles, so that the abrasive particles lose the cutting effect. The type of stainless steel is different, and the condition of the grinding wheel is different.

2. The thermal conductivity of stainless steel is small, the high temperature during grinding is difficult to output, and the surface of the workpiece is easily burned and annealed. The depth of the annealed layer can sometimes reach 0.01 to 0.02 mm. Severe fracture deformation during the grinding process results in work hardening on the abrasive surface. In particular, when austenitic stainless steel is ground, the austenite structure is not stable enough, and martensite structure is likely to occur after grinding, and the surface hardening is severe.

3, stainless steel has a large coefficient of linear expansion, which is easily deformed under the action of grinding heat, and the size is difficult to control. This is especially true for thin walls and elongated components. Most types of stainless steel cannot be magnetized. In the case of surface grinding, the workpiece can only be clamped by mechanical clamping or special clamps. The workpiece is clamped to the side of the workpiece, causing deformation and shape or dimensional errors. protruding. At the same time, it also produces jitter and scale-like ripples during the grinding process.

add to favorites Evaluate the shape of the grinding wheel Pc  

Because the surface of the grinding wheel directly affects the quality of the grinding surface, it determines the grinding performance and service life of the grinding wheel. Therefore, it is of great significance to evaluate the grounding of the wheel after trimming, and it can be used to guide the design of the wheel dresser and the dressing of the grinding wheel.

1. Ideal grinding wheel shape and its evaluation

The state of the thin abrasive cutting disc for metal can be used to predict the amount of grinding surface. In order to make the distribution of the cutting marks on the surface of the workpiece to be more uniform and reduce the roughness of the grinding surface, the grain spacing of the surface of the grinding wheel should be uniform; at the same time, in order to make the grinding particles in the grinding

The depth of the cutting marks on the surface of the workpiece is uniform, and the surface roughness of the surface is small. Therefore, the height distribution of the surface of the grinding wheel is uniform, that is, the contour is good; and in order to use the micro-knife in a semi-blunt state under appropriate grinding pressure The friction generated between the surfaces of the workpiece acts as a polishing device to obtain a grinding surface with high precision and small roughness, achieving high precision, small roughness, and grinding. Therefore, the particles on the surface of the grinding wheel should have the micro-knives described above. The ideal wheel has the three characteristics of uniformity, uniformity and micro-blade.

The ideal evaluation of the quality of the grinding wheel is as follows. The ideal wheel topography should have three characteristics. In order to make the abrasive grain distribution on the surface of the grinding wheel uniform, the surface of the thin flat cutting disc should obey the following two directions.

Uniform distribution on the uniform distribution of abrasive grains in the width direction of the grinding wheel and uniform distribution of abrasive grains in the circumferential direction of the grinding wheel
add to favorites Basic characteristics of the grinding wheel Pc  
No Picture

The intrinsic quality of diamond grinding wheel is mainly affected by abrasive, particle size, concentration, binder, filler and hardness and strength. Electroplating Ni-based bonding agent, high strength, large abrasive holding power, good shape retention of thestandard cut off wheel for metaland long service life, but its self-sharpness is poor and the adaptability is poor. Resin bonding agent: low strength, small abrasive holding force, abrasive grain Good properties, sharp surface of grinding wheel, high grinding efficiency: but not wear-resistant, low life; metal bond, grinding performance between electroplating and resin bonding agent, good overall performance.

The coarse grain size of the diamond will reduce the cutting wheel load, improve the cutting efficiency, and extend the life of the grinding wheel, but the collapse is large; the fine particle size will reduce the cutting and fracture, and reduce the surface roughness: but the life is short. The grinding wheel has a high concentration: the grinding wheel has a large number of abrasive grains, a single abrasive grain has a small grinding force, wear resistance, and the grinding wheel has a long service life: but it should not be too high. Filler is also the main method to improve the performance of the 7" cut off disc for stainless steel Adding alloy powder can improve the rigidity and wear resistance of the grinding wheel, and adding ordinary abrasive grains can improve the sharpness of the grinding wheel. The hardness and strength of the grinding wheel are high: the abrasive grain is not easy to fall off, and the wear life is high: but the sharpness of the grinding wheel is poor: it is easy to affect the quality of the grinding workpiece. For specific use, adjust according to different grinding conditions: to adapt to its comprehensive grinding performance.

The geometric accuracy of the grinding wheel has little effect on ordinary grinding, because the working face of the grinding wheel often has to be repaired on the machine. When the electronic components are precision cut and ground, the thickness of the ultra-thin grinding wheel is no longer trimmed, so the geometric accuracy of the cutting and the accuracy of the shape and position must also be taken seriously. The difference between the thickness of the grinding wheel and the large impact of the end face affects the cutting precision: there is competition; the inner hole of the grinding wheel is too large, the inner and outer circle concentricity is not good, and the grinding vibration is easy to occur: the workpiece is collapsed; the flatness of the grinding wheel is poor, the symmetry is poor, The difference in the perpendicularity between the outer circle and the end surface is likely to cause the cutting and eccentricity of the cutting: a beveling phenomenon occurs. In order to further improve the grinding and cutting effect of the grinding wheel, the optimization of the grinding wheel structure can also have a certain effect. For example, if the side back angle is set on both sides of the grinding wheel: it is beneficial to improve the cutting precision; the outer circle of the grinding wheel is provided with an arc: it can improve the cutting and collapse; the water tank is set in the outer circle of the grinding wheel to improve the chip removal ability: reduce the grinding temperature: However, the impact of the wheel with the sink and the workpiece can not be underestimated.

add to favorites Analysis of stone production line and corollary equipment Pc  
No Picture

SBM is a professional company specializing in manufacturing a complete set of stone crusher and is able to provide comprehensive technical support. This production line is mainly composed of vibrating feeding machine, jaw crusher, vibrating screen, impact crusher, belt conveyor and central electronic control. The designed output is 50-500 tons per hour. In order to satisfy the different processing demands of the customers, this production line can be equipped with cone crusher and dust removal equipment.

Big size stones are transferred to primary crusher through Vibrating Feeder from hopper for first crushing, and then the crushed materials are transferred to Impact Crusher through Belt Conveyor for secondary crushing. The crushed materials will be transferred to the vibrating screen, and separated to different sizes. Those aggregate with suitable size will be transferred to the final product pile and those with unsuitable size will be transferred to the Impact Crusher for re-crushing. It forms a closed circuit manifold cycles. The sizes of final products will be graded and separated according to customers' requirements, and the deduster will be attached for the sake of environment protection.

This sbm grinder production line is a professional equipment line for manufacturing building-used sand and stone materials and it is able to save energy by 50% than the traditional sand maker. This production line is able to crush various kinds of rocks, sand and river cobble into building-used sand with diverse granularities, and the final sand is even in granularity and high in compression strength so that is can better improve the quality of the buildings. This machine has many advantages such as reliable performance, reasonable design, convenient operation and high working efficiency.

SBM has work-class production lines and modern test base and all the products are designed, produced, assembled and tested according to the ISO9001:2000 international quality certification system standard. The crushing equipment and industrial powder grinding machine series of products have been widely used in power station, mining, metallurgy, construction, chemistry, steel and oil and other industries.

add to favorites Order Fioricet Pc  
No Picture
Where to buy fioricet online ?? This is first thing come to the mind when ordering fioricet online. In this article we will discuss about fioricet online and its side effects. lets start with the concept fioricet online? Well, In our fast and stressful life sometime or other we usually get headache due to anxiety, tight shedules. which somtime leads to severe headache. After consulting and visit to doctor, they prescribed the fioricet according to your cause of headache. The dosage as well been prescribed by the doctor after knowing your root cause of the headache. You can order fioricet by visiting buy fioricet websites. USES: Take this medication with food or milk. Take as prescribed. Do not increase your dose without approval. SIDE EFFECTS: May cause dizziness, drowsiness, an upset stomach and sleeping disturbances as your body adjusts to the medication. If you notice other effects not listed above, immediately contact your doctor. Buy fioricet, It is a third party online website linked to approved pharmacy and provide quality medication for fioricet. You can consult with the doctors online linked with this website. The FDA approved pharmacy is US based, so its reliable and fast. US to US shipment is made thats why nothing to worry about. Fioricet.org act as a medium to provide best quality fioricet with cheap price. When you are thinking for fioricet dont forget for order fioricet and visit fioricet.org So whenever the question arise where to buy fioricet online ? just go ahead and place your order hassle free. SIDE EFFECTS: May cause dizziness, drowsiness, an upset stomach and sleeping disturbances as your body adjusts to the medication. If you notice other effects not listed above, immediately contact your doctor. About Fioricet.org, It is a third party online website linked to approved pharmacy and provide quality medication for fioricet. You can consult with the doctors online linked with this website. The FDA approved pharmacy is US based, so its reliable and fast. US to US shipment is made thats why nothing to worry about. Fioricet.org act as a medium to provide best quality fioricet with cheap price. When you are thinking for fioricet dont forget for order fioricet and visit buy fioricet online So whenever the question arise where to buy fioricet online ? just go ahead and place your order hassle free.
add to favorites Summary of three ways of efficient grinding Pc  

High speed grinding

High-speed grinding is a process that increases the removal rate of grinding and the quality of grinding by increasing the linear speed of the diamond wheel. Relative to the 7'' cut off disc for metalproduct application,High speed grinding has the following advantages:

(1) Under a certain unit time grinding amount, when the linear speed of the grinding wheel is increased, the cutting thickness of the abrasive grains is thinned, so that the load of the single abrasive grain is reduced, and the durability of the diamond grinding wheel is improved;

(2) Reduction of surface roughness of grinding: After increasing the linear speed of the diamond grinding wheel, the cutting thickness of the abrasive grains becomes thinner, so that the relative feed amount of the grinding wheel becomes smaller and the roughness is also reduced.

(3) The reverse grinding force is reduced and the accuracy of the workpiece is improved.

2. Slow-feed to deep deep grinding

Slow-feeding Large-depth deep grinding is also called deep groove grinding or peristaltic grinding. It is ground with a large grinding depth (up to 30mm) and a very low table feed (3-300mm/min). The required dimensional accuracy can be ground by one or several passes. The advantages of slow-feeding and deep-depth grinding are:

(1) When the retarding is applied to grinding. The grinding wheel and the outer edge of the workpiece are only contacted once or several times, and the chance of impact is less than that of the general reciprocating grinding, which can extend the durability of the grinding wheel and maintain its forming precision.

(2) The workpiece feed speed is very low during deep grinding, which makes the radial feed rate of the grinding wheel lower and the radial wear is relatively small. Conducive to rough, fine grinding of complex shaped workpieces.

(3) The grinding depth of the grinding wheel for slow-feed grinding is about 1000 times larger than that of ordinary grinding, and the grinding force is increased by 2-4 times (under the same metal removal rate) than that of ordinary grinding.

3. Abrasive belt grinding

Abrasive belt grinding uses high-speed moving abrasive belts as grinding tools. The method of grinding various surfaces is called belt grinding. The advantages of abrasive belt grinding are:

(1) High production efficiency, sharp abrasive grains on the abrasive belt, large cutting amount; sand bandwidth, large grinding area, and productivity 5-20 times higher than grinding with grinding wheel;

(2) The grinding energy consumption is low, because the belt is light in weight, the contact wheel and the tensioning wheel are small in size, and the high-speed moment of inertia is small, so the power loss is small;

(3) Good processing quality, can guarantee constant speed work, less heat, no need to trim, sharp abrasive grain, good heat dissipation condition of sand belt, high precision and small surface roughness value

(4) The belt is soft and can be applied to the forming surface for grinding, which is suitable for grinding various complicated shapes.In fact, thin flat ,thin flat cutting disc are matched with these advantages.

The disadvantage of abrasive belt grinding is that the belt is consumed quickly, the belt grinding cannot process small diameter holes, blind holes, and the step outer circle and gear can not be processed. Of course, when using high-speed grinding, it is necessary to confirm that the working speed of the machine tool must be lower than the safe use line speed of the grinding wheel, and the use of slow-feeding to deep-depth grinding also ensures the safety during grinding.
add to favorites What Escape Room Prop is Your Favorite? Pc $ 1.00
No Picture

“Still a long way to go before everything is coordinated and working well,” escape room prop says of his progress. “Staircase” is perhaps a generous characterization. “So many got shut down that year,” Basu says. “Since then, with no salespeople or out-marketing, our shop has grown and employs 25 people.
“Safety is about being safe from harm. “Pretty soon, people were approaching the booth to ask if I could fabricate other items. “Play a game for a bit and then come downstairs for a snack before you start your homework, OK?  “People were living in all kinds of crazy places,” he says.  “People don’t care when poor black people die because they can’t see the economic benefit of that person existing to begin with,” she says.
“Our landlord became pissed because we had so much space for the price we were paying,” Hummel says, whose collective at Mother’s paid a total of $2,000 a month for 7,000 square feet. “One spark and it will all be bad,” says an officer in one of seven videos the San Jose Mercury News obtained of police examinations of the interior. “Now the industry he founded is moving on from kid stuff,” the subheading states, “to cultural force.

escape room prop

If you like this knock lock prop, you can view details at http://www.1987studio.com/en/h-pd-3.html

“Nobody can afford housing, especially folks of color. “My first business is making 3D objects. “Maybe some people were drinking and smoking in there,” he says, “but that’s what they were doing in Ghost Ship. “Laws are irrelevant. “Landlords definitely preferred the new tenants to the old ones. “Just doing what they wanted, and building these weird living spaces.
“It’s really not sign equipment; it’s printing on an object with an idea—whether it’s a sign or anything else. “It’s probably not going to immediately happen for us, but it sounds awesome.  It’s justifiable not to trust the city. “It’s as if I have awoken from a dream filled with opulence and hope .
“It was really intense. “In their frame of mind, those people were not part of the story. “In addition, over 6,000 sellers from Marketplace are placing offers for Black Friday,” says Stanciu. “diy escape room props thought, ‘well, that’s different. “I think you should exercise whatever remedies you have to immediately take possession of the property to prevent further damage.

add to favorites Building waste disposal becomes easy with new mobile crusher Pc  
No Picture

As for the management and handling of building waste, most of the European and other developed countries adopt building waste source control policy, that is to say, before the building waste is formed, use scientific management and effective control to minimize the waste. As for the already produced construction waste crusher, they often use scientific means to endow it with the function of renewable resources. However, in China, the building waste is disposed by burying, which not only wastes the available resources, but polluted the environment, in the way, the losses outweighs the gains.

In recent years, China also begins to pay attention to the reasonable use of materials resources, put forward many policies such as consumption conservation and emission reduction, and conducts a lot of practical research, such as traditional collection and recycling and application of waste brick and stone materials in gardens and avenues. The recycled building materials are lower in prices compared with common building materials, so that they are well received in the market. In order to effectively resolve the city building waste problem, the government department in many cities passed the decision of taking advantage of building waste disposal equipment to process the building waste, carried out the strategy of collecting and recycling the building waste and researched the application situation of the building waste disposal equipment in the market. The professional building waste disposal equipment produced by us, portable crusher plant is able to process about three thousand tons of building materials every day, part of the wastes are used as baking-free brick materials by the local brick manufacturing companies, and the rest of the concrete aggregates are used as water-stable layer materials in municipal administration avenues.

Because the building waste is stocked in a concentrated place, the storage place is limited and the transportation is not very convenient, at this time, the workers can make use of mobile building waste crusher in order to conduct multi-level crushing to large-sized materials. The equipment covers a small space so that it will save a lot of infrastructure construction and removal cost. In addition, this machine is able to crush the materials in the working site so that it will not need to transport the materials to other places to be crushed, so that the materials transportation cost will be greatly reduced. And what is more, the building waste crusher can also be redesigned and reshaped according to the actual spot so that it is the most ideal equipment for processing and handling the building waste. Other than the mobile crusher, other crushing and grinding machines such as ball mill researched and developed by us also enjoy great popularity.